Opaque aerosol leather dye Super Color, 150 ml, TRG | Fabric Dyes & Paints

Opaque aerosol leather dye Super Color, 150 ml, TRG NewCondition

Dye in aerosol for leather and synthetic leather; can be used on cardboard, canvas, fabrics etc.

If your shoes seems new but you are tired about the color, or you just want to change the color; if your shoes are old and you want to change the tonality to make seems news, TRG SUPER COLOR gives you the chance to do it in a easy way!

Application

For leather and synthetic leather. Not suitable for suede or nubuck.

Features

Changes the color, even black to white.
Easy to apply.
Quick drying.
No further finishing required.

Use: 1) remove dirt, 2) remove the finish (with a TRG Conditioner), so that the dye can adhere to the leather, 3) shake the spray can well, 4) protect the environment e.g. with old newspapers, 5) protect areas that you do not want to dye with adhesive tape, 6) moving hand smoothly, spray a thin coat of dye from a distance of approx. 20 cm on the desired surface, 7) allow to dry well., 8) a second application may be necessary. Is better two thin coats than one thick. A thick coat can damage the shoe cracking it by daily shoe use.

Content 150 ml is sufficient for one pair of shoes or approx. ½ square meter

NOTE! You should use the dye spray outdoors or have ventilation enough.

Step-by-step tutorial HERE

CAUTIONS - DANGER
For your security, use only for its purpose and in accordance with the instructions.
Extremely flammable aerosol.
Pressurised container: May burst if heated.
Causes serious eye irritation.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Read label before use.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Do not spray on an open flame or other ignition source.
Do not pierce or burn, even after use.
Wash hands thoroughly after handling.
Wear protective gloves/protective clothing/eye protection/face protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
Protect from sunlight. Do no expose to temperatures exceeding 50 °C/122°F.
Manufacturer cannot be responsible for dangerous storage conditions or misuse.